We offer buildings up to 60 feet wide, 20 feet tall, and as long as you want to go.

The majority of components utilized in our frames are made of 2 1/4″ x 2 1/4″ square galvanized steel tubing for 12 gauge buildings (upgrade) and 2 1/2″ x 2 1/2″ square galvanized steel for 14 gauge buildings (standard).

Certified buildings are engineered to meet a specific snow and/or wind load for the area in which you live. To include bracing on each leg, 25% more screws, concrete or high-wind anchors, and generic engineered drawings.

Many areas require a specific wind or snow load.

You should be aware of your area’s requirements and purchase a structure that meets your area’s requirements. You can rest assured that we will always recommend additional anchoring and bracing. However, we cannot know what your specific area’s load requirements are since they change frequently. It is your responsibility to know what they are and to purchase a structure accordingly!

Four anchoring methods are used to secure the structures. If the structure is to be installed on a concrete pad or footing, concrete wedge anchors would be used. For ground installations, a 32 inch rebar anchor (pin anchor) is the standard anchoring system. We recommend that for ground installations that you always purchase the optional helical mobile home anchors. On most certified buildings, a helical mobile home anchor is used. However, in some instances where helical anchors cannot be used, the manufacturer will switch to asphalt anchors.

Cold-Form Steel budlings and carports are often more cost-effective than traditional construction materials. They can be manufactured and assembled quickly, reducing construction time and labor costs.

Red Iron is Expensive and a thing of the past. Our Cold-Form Steel Products are engineered and rated for 140 MPH winds and 30 PSF snow load.

In addition to this, our cold formed steel is galvanized which helps to prevent rust, unlike other types of steel.

Our structures come standard with 29-gauge galvanized "Panel-Loc Plus" panels that are coated with Rainbow Paints (17 Color Choices).

These type of panels have an extra striation on top of the rib that gives it extra durability and protection against leaking.

You can upgrade to the more robust 26-gauge at an additional cost. Let us know if you would like to upgrade.

Yes, for an uncharge we offer two different types of insulation that we sandwich between the paneling and framing.

• 1/4" Double Bubble Radiant Barrier (Good)
  • Heat-shielding.
  • Helps prevent condensation that can occur when temperature differences are extreme on either side of the material.
  • Looks like Foil
• 2" Fiberglass  (Best)
  • Approximate R-Value of 7.
  • White poly backing.

Our manufacture's order entry department will contact you within 1 week to verify your order. This means they will confirm the design, confirm that your building site is ready, and that you're prepared for installation.

Once your order is verified, the scheduling department will reach out to you with an installation date.

Once a date has been set, the manufacture will send a crew to install your metal building or carport.

This manufacturer fulfillment process generally takes 2-4 weeks once the order entry department has verified your order.

There are things outside of our control like bad weather, equipment breakdown, and holidays that may delay your install. We will do the best we can to fulfill your order in a timely manner.

You must ensure that the site designated for installation is a leveled and squared surface. In order to provide you with affordable quality products, with quick installation, the site preparation and building permits are your responsibility. You are 100% responsible for any local permits, covenant searches, rights of way, set-back restrictions, locating utility lines, etc.

No, we only install our doors and windows. However, if you wish to put different doors or windows in. We can make frame-outs for you at an additional cost. But we will not install customer provided doors or windows.

Please reach out to us if you plan on doing this. We can not accommodate your request if you do not tell us before we manufacture your building. 

Our manufacturers offer a limited 20 year rust through warranty on tubing, 10 year sheet metal warranty and finally a 180 day workmanship warranty on certified structures that have a vertical roof.